I wondered about the missing tabulator settings and key, but I found this link about a first edition Valentine, also Made in Italy and also missing the tabulator set/clear and key.
And the mystery about the serial number is solved — Stephen Green from the Facebook Olivetti Valentine group suggested that the hyphen might actually be a 4, so I cleaned it up some more and took another picture and, yes, the number is 3000408. Since the first Valentine was the 3000001, this is one of the first Valentines.
I transplanted keys from an Olivetti 45 to my Valentine. 45s are easy to find and cheap. It’s neat that you have the rubber case clamps. Mine were missing, so I rigged a red suspender belt for carrying.
I checked out a few websites on the history of the Valentine, but it seems like the first edition was made in Italy, with the bulk of Valentines made in Olivetti’s Barcelona plant. So the markings of Made in Italy plus the unusual serial number 3000-08 seem to indicate that it’s indeed a first edition. And even if it was a later edition, forty is a good price for a Valentine, especially a working one with an intact case… As you can see from the typecast part, it still types pretty good.
Edited to add: a closer look reveals the hyphen to be a 4, so the serial number is 3000408. Since the Valentine started with 3000001, this is one of the earliest Valentines to be produced, and definitely from 1969.
Hello. About this particular typewriter, i cannot unscrew the orange caps so that i can replace the ink band. My caps have also the flared bottom that cover the whole band disks. Could you plese tell me if they unscrew clockwise or counterclockwise? I found a manual on internet but not a single mention about this detail, and i don’t want to damage the machine. Looking forward to any help.
Hello Lucian,
On my Valentine, the orange spool knobs unscrew counter-clockwise. I think you can assume that the flared ones on your Valentine unscrew counter-clockwise as well. If you’re truly worried about breaking them, you might want to try warming them gently with a hair dryer (they’re plastic, so don’t heat them up too much!) and do it with patience and sensitivity.
When you do get them off, clean the spool pin threads and the inside of the knobs with Zippo Lighter Fluid (naphtha), let that sit for a couple of hours and lubricate the threads with Lubra Rapid Oil for cylinder locks, available at most specialist lock smiths. Sewing machine oil might also work fine. Don’t spray, but put some oil in a bowl (I use old glass jar caps) and put a few drops on the threads with a Q-Tip.
Hope that works.
Martyn.
I transplanted keys from an Olivetti 45 to my Valentine. 45s are easy to find and cheap. It’s neat that you have the rubber case clamps. Mine were missing, so I rigged a red suspender belt for carrying.
Nice find!
LikeLike
Thanks for the tip. I’ll see if I can find a spare keytop from a parts machine.
LikeLiked by 1 person
Wow. I wonder whether you’ve found one of the first Valentines ever! In any case, 40 was a very good deal.
LikeLiked by 1 person
I checked out a few websites on the history of the Valentine, but it seems like the first edition was made in Italy, with the bulk of Valentines made in Olivetti’s Barcelona plant. So the markings of Made in Italy plus the unusual serial number 3000-08 seem to indicate that it’s indeed a first edition. And even if it was a later edition, forty is a good price for a Valentine, especially a working one with an intact case… As you can see from the typecast part, it still types pretty good.
Edited to add: a closer look reveals the hyphen to be a 4, so the serial number is 3000408. Since the Valentine started with 3000001, this is one of the earliest Valentines to be produced, and definitely from 1969.
LikeLike
There’s something a bit NQR about that. I have a theory that it could be a production run model.
LikeLike
Are you talking about the serial number? Because I found out that the hyphen was actually a 4, so the serial number is 3000408.
LikeLike
Hello. About this particular typewriter, i cannot unscrew the orange caps so that i can replace the ink band. My caps have also the flared bottom that cover the whole band disks. Could you plese tell me if they unscrew clockwise or counterclockwise? I found a manual on internet but not a single mention about this detail, and i don’t want to damage the machine. Looking forward to any help.
LikeLike
Hello Lucian,
On my Valentine, the orange spool knobs unscrew counter-clockwise. I think you can assume that the flared ones on your Valentine unscrew counter-clockwise as well. If you’re truly worried about breaking them, you might want to try warming them gently with a hair dryer (they’re plastic, so don’t heat them up too much!) and do it with patience and sensitivity.
When you do get them off, clean the spool pin threads and the inside of the knobs with Zippo Lighter Fluid (naphtha), let that sit for a couple of hours and lubricate the threads with Lubra Rapid Oil for cylinder locks, available at most specialist lock smiths. Sewing machine oil might also work fine. Don’t spray, but put some oil in a bowl (I use old glass jar caps) and put a few drops on the threads with a Q-Tip.
Hope that works.
Martyn.
LikeLike